1992 seadoo sp bombarder spark plugs not getting fire?

-First off trim 1/4" at end of leads, reconnect and test plug connected over a good earth.



Check the continuity of the Safety Switch Lanyard. It is normally "open". The color codes of the 2 wires are Black and Black/Yellow. These feed back into the electrical module box. The Start /Stop switch is normally "open". The color codes of the 2 wires are Black, that goes direct to ground, (to stop the engine), and the Yellow/Red that goes to the electrical module box. Check the continuity of this switch also.



With wire from mpem to coil unplugged, and still no spark, possibly coil or stator.



Hope it helps.

Good luck with it.